1 Vision worked with to complete a 29.9KWP solar array on Ysgol Carreg Hir, Neath Port Talbot. This system was comprised of 140 Bisol 280W solar panels. Our dedicated MCS credited solar installers worked to complete the system within 8 days. For the mounting system on this job we used our specialist preffered Renusol standing seam clamp mounting system. 

Renusol clamps are alighend when the cross beam of the roof is tightened. The clamp is then pressed onto the seam as far as possible, the tightening torque then has to be places in such a manner that the standing seams are no affectted and the thermal expansions of the sheet metal are not impeeded. Below is a reference image to show a standing seam mount clamp.

When we design our systems we use a software called PVSol, This system is useful. because once you input the amount of panels, optimisers and the orientation of the system it will tell you the total installed power, Max achieved DC and power, DC/AC oversizing, Max active AC power and Annual energy output. PVSol will also tell you monthly estimated generation, the systen loss diagram and the bill of materials (BOM).